EASYRIG III CINEMA & FLOWCINE Serene

Відгуки (0)

Stabilizing Camera Support absorbs and redistributes the camera’s weight, with a spring arm that is stabilizing vibrations and shaking

В список бажань
Запит ціни
Швидкий запит в 1 клік
Товар більше недоступний

The Flowcine Serene is a two axis spring arm that attaches at the end of the (2.5/3) arm. It stabilizes vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilizes side to side errors in the same scenarios by counter pivoting around its centre axis. At the same time you have full use of the spring extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilization adding two more stabilized axis to your existing system. The Serene can take rigs between 6-20 kg and you can easily fine tune the spring tension without tool.

The Serene mounts at the very end of the arm and the string is routed upwards and through the Serene instead of the normal way straight down from the tip of the Easyrig. To make this happen you have to slightly alter your arm with one or two holes (depending on model). This is a fairly easy operation that most can do themselves and a drill template piece is supplied for exact placement of the holes.

1 x EASYRIG 400N/500N/600N/700N (load 11/13/15/20kg) / система стабілізації
1 x Flowcine Serene / пружина для EASYRIG
1 x Flowcine Serene Extension (for 400N & 600N) / подовжувач для стабілізації EASYRIG
1 x Easyrig Bag / сумка

  • Максимальне навантаження 400N

    11 kg

  • Максимальне навантаження 500N

    13 kg

  • Максимальне навантаження 600N

    15 kg

  • Максимальне навантаження 700N

    20 kg

  • Максимальне навантаження FLOWCINE Serene

    19.5 kg

  • Вага

    3.5 kg + 1.2 kg

  • 16×9 Kong Quick Release Adapter
  • EASYRIG Quick Release

Відгуки

Відгуків немає, поки що.

Будьте першим, хто залишив відгук “EASYRIG III CINEMA & FLOWCINE Serene”“