EASYRIG III CINEMA & FLOWCINE Serene

Reviews (0)

Stabilizing Camera Support absorbs and redistributes the camera’s weight, with a spring arm that is stabilizing vibrations and shaking

Add to wishlist
PRICE REQUEST
One Click Request
This item is no longer available

The Flowcine Serene is a two axis spring arm that attaches at the end of the (2.5/3) arm. It stabilizes vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilizes side to side errors in the same scenarios by counter pivoting around its centre axis. At the same time you have full use of the spring extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilization adding two more stabilized axis to your existing system. The Serene can take rigs between 6-20 kg and you can easily fine tune the spring tension without tool.

The Serene mounts at the very end of the arm and the string is routed upwards and through the Serene instead of the normal way straight down from the tip of the Easyrig. To make this happen you have to slightly alter your arm with one or two holes (depending on model). This is a fairly easy operation that most can do themselves and a drill template piece is supplied for exact placement of the holes.

1 x EASYRIG 400N/500N/600N/700N (load 11/13/15/20kg)
1 x Flowcine Serene
1 x Flowcine Serene Extension (for 400N & 600N)
1 x Easyrig Bag

  • Load Capacity 400N

    11 kg

  • Load Capacity 500N

    13 kg

  • Load Capacity 600N

    15 kg

  • Load Capacity 700N

    20 kg

  • Load Capacity FLOWCINE Serene

    19.5 kg

  • Weight

    3.5 kg + 1.2 kg

  • 16×9 Kong Quick Release Adapter
  • EASYRIG Quick Release

Reviews

There are no reviews yet.

Be the first to review “EASYRIG III CINEMA & FLOWCINE Serene”